How to deal with the robot not performing Intelligent Breakpoint Continuation scanning?

Check if the Feature is Enabled:
Ensure the "Intelligent Breakpoint Resume" switch is turned on in the settings.

Do Not Disturb Mode:
The feature won’t work if the robot is in Do Not Disturb (DND) mode. Disable DND mode if needed.

Check for Fault Alarms:
If the robot triggered a fault alarm during its return to the charging station, the breakpoint resume will not activate. Resolve any fault alarms before continuing.

Avoid Restarting or Resetting:
Do not restart the robot or reset it to factory settings after the intelligent breakpoint resume has been triggered, as this will disable the function.

Note: The intelligent breakpoint continuation scanning is only available in Automatic Mode. Ensure the robot is in this mode to use the feature.