How to install my robot?

• Open the outer packaging of the box. Remove the DEEBOT, station, accessory packaging box and remove the protective bags on the robot and the station.
• Place the DEEBOT on the floor and open the removable cover at the top and remove the rubber C-shaped band which is placed next to the bumper. Put back the cover again.
• Place the DEEBOT upside down and with the bottom facing up. Take out the side brush from the accessory kit. Align it with the card slot, then firmly press it down. Ensure to hear a “click” sound to get the confirmation of successful installation.
• In the Omni station, gently press the dust cabin in the centre to open it. A dust bag is installed which can be cleaned and used again. It needs to be changed once it is worn out.
• Align the base with the station and place it parallel to the station, gently push it inward. Ensure that a “click” sound is heard to confirm successful installation.
• Place the DEEBOT on the base for it charge and start working.
• Now download ECOVACS HOME application from Play Store or App Store.
• After successful installation of the application, scan the QR code on the DEEBOT for it to connect and pair.
• Follow the instructions as guided by the application.
• While using the DEEBOT for the first time, it needs to create a map of the place, and ensure that there are not too many obstacles in its route.
  (Too many obstacles can lead to a faulty or inefficient map creation)

Note : While connecting to the application, make sure your Wi-Fi is in 2.4G connection. If not, you can ask your service provider to enable 2.4G connection.